Honda BF250DXRC Outboard Motor
$19,460.00
Upgrade your boat with the Honda BF250DXRC Outboard Motor. High-performance 250 HP V6 engine featuring VTEC technology. Enjoy free worldwide shipping & warranty!
Buy Honda BF250DXRC Outboard Motor Online
The Honda BF250DXRC Outboard Motor is a powerful 250 HP four-stroke marine engine designed for boat owners who need strong acceleration, smooth operation, dependable performance, and advanced marine technology. Powered by a 60-degree V6 configuration with 24 valves and 3,583 cc displacement, the Honda BF250DXRC Outboard Motor delivers an impressive combination of power, torque, efficiency, and refined operation. Its 25-inch extra-long shaft makes it suitable for compatible boats requiring an X-type outboard configuration.
The Honda BF250DXRC Outboard Motor uses Honda VTEC technology to provide smooth power delivery and strong mid-range torque. The BLAST system is designed to improve low-speed acceleration and help the boat reach planing speed efficiently. With a full-throttle operating range of 5,300–6,300 RPM and 250 HP rated at 5,800 RPM, this Honda 250 boat motor is built for demanding marine applications.
The Honda BF250DXRC Outboard Motor features Honda’s PGM-FI electronic fuel-injection system, which precisely manages fuel delivery for responsive starts, throttle response, and efficient engine operation. Lean Burn Control technology is also designed to improve fuel efficiency during cruising conditions. These technologies make the engine a practical choice for boaters who want substantial power without overlooking fuel economy.
A 90-amp alternator with 60 amps of battery charging capacity helps support onboard electrical equipment. The AMP system can increase engine speed at idle when additional charging power is required. NMEA 2000 compatibility also allows engine information to integrate with compatible onboard marine electronics, including displays and navigation equipment.
The Honda BF250DXRC Outboard Motor incorporates corrosion-resistant components, stainless-steel hardware, protective coatings, and a freshwater flush port for easier maintenance after operation. Its power trim and tilt system provides convenient adjustment, while the 2:1 gear ratio contributes to strong overall propulsion performance.
If you are researching the Honda 250 V6 price, Honda 250 outboard price, or Honda 250 boat motor price, the BF250DXRC offers a premium combination of V6 power and modern marine features. Please note that this is a 250 HP model, not a 25 HP outboard, so searches for 25 HP Honda outboard price refer to a different engine class.
Product Specifications of Honda BF250DXRC Outboard Motor
| Specification | Details |
|---|---|
| Product Name | Honda BF250DXRC Outboard Motor |
| Manufacturer | Honda |
| Model | BF250DXRC |
| Engine Type | 4-Stroke SOHC V6 |
| Cylinder Configuration | 60° V6 |
| Number of Cylinders | 6 |
| Valves | 24 valves |
| Valves per Cylinder | 4 |
| Displacement | 3,583 cc / 219 cu. in. |
| Bore × Stroke | 89 × 96 mm |
| Maximum Rated Power | 250 HP |
| Rated Power RPM | 250 HP @ 5,800 RPM |
| Full-Throttle RPM Range | 5,300–6,300 RPM |
| Fuel Delivery | Programmed Electronic Fuel Injection (PGM-FI) |
| Fuel Type | Unleaded gasoline |
| Recommended Fuel Octane | 86 minimum |
| Ignition System | Microcomputer programmed |
| Starting System | Electric |
| Cooling System | Water cooled |
| Lubrication System | Wet sump / pressure lubrication |
| Exhaust System | Through propeller hub |
| Gear Ratio | 2.00:1 |
| Gear Shift | F-N-R |
| Shaft Length | 25 inches / 635 mm, Extra Long X-Type |
| Recommended Transom Height | 25 inches / 635 mm |
| Overall Width | Approximately 26 inches / 660 mm |
| Dry Weight | Approximately 286 kg / 631 lb |
| Alternator | 90 amp |
| Battery Charging Capacity | 60 amp |
| AMP+ | Yes |
| VTEC | Yes |
| BLAST | Yes |
| Lean Burn Control | Yes |
| NMEA 2000 Compatibility | Yes |
| Power Trim & Tilt | Yes |
| Tilt Range | 68° |
| Trim Range | -4° to +16° |
| Steering Angle | 30° |
| Propeller | Optional, depending on configuration |
| Counter-Rotating | No for DXRC |
| Shaft Type | X-Type |
| Application | Compatible boats requiring a 25-inch outboard |
Benefits of Honda BF250DXRC Outboard Motor
- Strong power across the whole rev range
VTEC® gives you power where and when you need it. It suits heavy boats, offshore work and twin-engine setups. - Quicker planing and holeshot
BLAST™ advances ignition timing during hard acceleration, which greatly improves holeshot. Your boat gets on the plane faster, even when loaded with gear and passengers. - Better fuel economy
Lean Burn Control widens the performance range and gives better mileage and lower operating costs across more speeds. Long trips cost less to run. - Powers your electronics
An adjustable idle-charge system raises engine speed by 100 rpm when it senses demand from sonar, GPS, a stereo, live wells or trolling motors. With 60A of charging output, the engine can run your onboard equipment. - Smooth, efficient airflow
Dual Stage Induction adjusts the intake to match engine speed. This helps with smooth running and efficiency. - Clean, low-maintenance four-stroke design
Honda’s four-stroke design combines proven reliability and good fuel efficiency, with no oil mixing. You fill the tank with fuel and go.
The gearcase is more hydrodynamically efficient, and its gears are 10% thicker than the BF225’s. That means more strength under load. - Easy repowering
The BF250 mounts on industry-standard centers, so repowering twin installations is bolt-on easy. - Full control
Power trim and tilt, a tilt limit setting, electric start and NMEA 2000 compliance make it easy to use and to connect to compatible marine electronics. - Honda reliability
Honda outboards share many technologies and components with Honda vehicles, built on years of proven engineering. The engine also comes with a Honda marine warranty.
What is the horsepower of the Honda BF250DXRC Outboard Motor?
The Honda BF250DXRC Outboard Motor is rated at 250 HP and uses a 60-degree V6, 24-valve, four-stroke engine with 3,583 cc displacement.
What is the shaft length of the Honda BF250DXRC?
The Honda BF250DXRC features a 25-inch extra-long X-type shaft, making it suitable for boats designed for this transom height.
